6 <serial ata interface, 7 <ethernet interface, 8 <onboard display interface – COMMELL LE-37D User Manual
Page 14
![background image](/files/767943/content/doc014.png)
14
2.6 <Serial ATA Interface>
LE-37D has one SATAII interface, the transfer rate of the SATAII can be up to 300MB/s.
2.7 <Ethernet Interface>
The board integrates with two
Intel® I210-AT controllers, The Intel Gigabit Ethernet
supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance.
2.8 <Onboard Display Interface>
Based on Intel CPU with built-in HD Graphic, the board provides one DVI (onboard) and
one DisplayPort, two 40-pin LVDS interface with 5-pin LCD backlight inverter connector
and internal 16-pin CRT interface.
The board provides double display function with clone mode and extended desktop
mode for DVI, DisplayPort, CRT and LVDS.
2.8.1 <External Display>
Please connect your monitor which supports DisplayPort and DVI to connect
onboard rear I/O Port.
2.8.2 <Internal Display>
The board provides two 40-pin LVDS connector for 18/24-bit single/dual channel
panels, supports up to 1920 x 1080 resolution, with one LCD backlight inverter
connector and two jumper for panel voltage setting.
Please install LVDS cable before boot up
.