Doremi DCP-2000 - Manual (Page 4)

1 Introduction
1.1 Purpose
The purpose of this document is to provide guidance on how to use the Diagnostic Tool
application. The Diagnostic Tool application can be used with the following servers: DCP-2000,
DCP-2K4, DSV-J2, and ShowVault. This application provides information for each drive,
detailed reports, and allows the user to replace and rebuild a failed RAID.
1.2 Software Version
This document complies with DCP-2000, DCP-2K4, DSV-J2, and ShowVault software version
2.2.x and higher. If you cannot upgrade your software, contact Doremi for older versions of this
document.
1.3 Contact
If in need of help or assistance, please contact your nearest Doremi Labs Technical Support at:
USA
• 24/7 Technical Support line: +1-866-484-4004
• Technical Support Email: [email protected]
Europe
• 24/7 Technical Support line: +33 (0) 492-952-847
• Technical Support Link: http://support.doremitechno.org/ticketing
Japan
• Technical Support line: +044-966-4855
• Technical Support Email: [email protected]
Australia ~ China ~ India ~ Indonesia ~ Korea ~ Malaysia ~ New Zealand ~ Philippines ~
Singapore ~ Taiwan ~ Thailand
• Technical Support Email: [email protected]
DTL.OM.000169.DRM Page 4 Version 1.7
Doremi Cinema LLC