Future Automation QA2 - Manual (Page 17)


In
st
all
at
io
n
: S
ta
ge
1
2
Page 16 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
QA2 & QA2-60 - Quad Arm
In - Brings the bracket
fully in, parallel to the wall Stop - Will stop
the operation at
any position
Preset - Moves arm to recess
position, head parallel
Operation Buttons for the IR Remote
Note
Only buttons indicated are functional with
the product. Any button pressed when in
motion will stop the mechanism.
Home - Moves the arm
out, head parallel
Store then D - Set programmable
viewing angle D
Store then F - Set programmable
viewing angle F
Store then E - Set programmable
viewing angle E
IN position
Max LEFT position
if limit not set
Max RIGHT position
if limit not set
Once stored limits have been set, the mechanism will not be able to travel beyond these points
After pressing STORE you have a
2 second window to select your
save button, after 2 seconds the
command is void.
Max OUT parallel
position
OUT parallel
position
> - Moves arm out, head rotates
to right viewing angle
< - Moves arm out, head rotates
to left viewing angle
Out - Moves the arm out,
no head movement