Monroe Electronics 626 - Manual

Model 626 Video Distributor Instruction Sheet
Installation
1. Connect your single
input source of video
to the "F" connector
labeled input.
2. Connect the 626's
outputs to the inputs of
your equipment.
3. Connect 75
Ω
termin-
ators provided, to
unused video outputs.
4. Connect the 9 VAC
power plug to the VAC
input jack on the 626.
Then connect the
power pack to 117
VAC.
Operation
The 626 performs as an
interface, allowing a single
input source of video to be
split into four identical
outputs.
The 626 overcomes line
loss, assures line equa-
lization, and adds outputs
to equipment such as
character generators.
Specifications
Input
75
Ω
terminated, 1Vp-p
Outputs
4 75
Ω
terminated, 2Vp-p
Bandwidth
±
0.5 dB 0 to 30 MHz.
- 3 dB at 50 MHz.
Gain
Fixed
Power Requirement
117VAC
±
10%, 60Hz.
Power pack output; 9VAC
Physical
1.50"H x 2.75"W x 5.25"D
Design and specifications are
subject to change without notice.