NEXCOM VMC 1000 User Manual
Page 7
![background image](/files/769740/content/doc007.png)
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
vii
VMC 1000 User Manual
Preface
Board Level
?
Component fee: NEXCOM will only charge for main components, such
as SMD chip, BGA chip, etc. Passive components will be repaired for free,
ex: resistors, capacitors.
If RMA goods can not be repaired, NEXCOM will return it to the customer
without any charge.
Warnings
Read and adhere to all warnings, cautions, and notices in this guide and
the documentation supplied with the chassis, power supply, and accessory
modules. If the instructions for the chassis and power supply are inconsistent
with these instructions or the instructions for accessory modules, contact
the supplier to find out how you can ensure that your computer meets
safety and regulatory requirements.
Cautions
Electrostatic discharge (ESD) can damage system components. Do the de-
scribed procedures only at an ESD workstation. If no such station is avail-
able, you can provide some ESD protection by wearing an antistatic wrist
strap and attaching it to a metal part of the computer chassis.
Safety Information
Before installing and using the device, note the following precautions:
▪
Read all instructions carefully.
▪
Do not place the unit on an unstable surface, cart, or stand.
▪
Follow all warnings and cautions in this manual.
▪
When replacing parts, ensure that your service technician uses parts spec-
ified by the manufacturer.
▪
Avoid using the system near water, in direct sunlight, or near a heating
device.
▪
The load of the system unit does not solely rely for support from the
rackmounts located on the sides. Firm support from the bottom is highly
necessary in order to provide balance stability.
The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dis-
card used batteries according to the manufacturer’s instructions.
Installation Recommendations
Ensure you have a stable, clean working environment. Dust and dirt can get
into components and cause a malfunction. Use containers to keep small
components separated.
Adequate lighting and proper tools can prevent you from accidentally dam-
aging the internal components. Most of the procedures that follow require
only a few simple tools, including the following:
• A Philips screwdriver
• A flat-tipped screwdriver
• A grounding strap
• An anti-static pad
Using your fingers can disconnect most of the connections. It is recom-
mended that you do not use needlenose pliers to disconnect connections as
these can damage the soft metal or plastic parts of the connectors.
- EBC 352
- EBC 353
- EBC 355
- EBC 354
- ICES 268
- ICES 667
- ICES 254
- NEX 604
- NEX 608
- ICES 668
- NEX 607
- NEX 609
- NEX 611
- NEX 613
- NEX 617
- NISE 101
- NISE 104
- NISE 2020
- NISE 105A
- NISE 103
- NISE 2110A
- NISE 2420
- NISE 301
- NISE 2310E
- NISE 2210E
- NISE 3100eP2
- NISE 300
- NISE 3140P2E
- NISE 3520P2E
- MAC 3500P2-GTS8
- MAC 3500P2-GTS8
- NISE 3600E
- NISE 3720P2E
- NISE 3640P2E
- NISE 3640M2E
- NISE 4000
- nTUF 600
- NEX 716VL2G
- NISE 4000P4E
- NISE 4000P2E
- NEX 732L2G
- NEX 883
- NEX 890
- NEX 980
- NEX 852VL2
- NEX 981
- PEAK 877VL2
- PEAK 886VL2
- PEAK 887VL2
- APPC 1721T
- APPC 1940T
- IPPD 2100P
- APPD 1900T
- APPC 1931T
- NPT 1500
- NPT 1500
- NPT 5851
- NIFE 101
- IPPC 2160P
- NISE 90
- MPPC 3220T
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- NCr-303-VHR
- OPPC 1720T
- NViS 2280
- VTC 6210-BK
- VTC 6210-BK
- VTC 7240
- VTC 7240
- NViS 6220
- NViS 5604-i7
- NDiS 102
- NDiS 111
- NViS 3542P8
- CMS 2100
- PDSB 6120
- NDiS 126
- NDiS B322
- NDiS B322
- NDiS 127
- NDiS 163
- NDiS 165
- NDiS 167
- NDiS B532
- NDiS B533
- NDiS 166
- NDiS M324
- NDiS M422
- NDiS M532
- NDiS OPS-M50
- VTC 100
- NDiS M533
- VTC 1000
- VTC 6100
- VTC 1010
- NDiS B862
- VTC 2100
- VTC 6120
- VTC 6200-NI
- VTC 6110
- VTC 6201
- VTC 7120-D1K
- VTC 7120-D1K
- VES30-8S
- VTC 7120-C4SK
- nROK 3000
- MRC 2200
- MRC 1100
- nROK 500
- nROK 5500
- VMC 1100
- VMD 2002
- DNA 1150
- VMD 3002
- DNA 120
- DNA 125B
- NSA 1150
- NSA 3150
- VMC 4011
- NSA 3130
- IFA 3610
- NSA 5130
- NSA 5150