Useful information part 4, Troubleshooting, Specifications – Casio PCR-265P User Manual
Page 38
36
USEFUL INFORMATION
Part 4
1.
Troubleshooting
Symptom/Problem
Most common causes
Solutions
Return key to where it stops buzzing
and press
p
.
Prior to starting registration of any other
operation, press
Z
~
<
and then
:
.
Remove jammed paper. Turn Mode
switch to OFF then turn to ON, or Turn
power OFF and then turn power ON.
Program printer to print receipts.
Use the PGM key.
Program the dept. as a normal dept.
Use Z mode to take out reports.
Put in new batteries.
Pull lever underneath register at rear.
Note:
If you cannot resolve your difficulty, please feel free to call your
dealer or 1-800-638-9228.
Changing modes without completing transaction.
Sign on operation is not performed.
Printer paper is jammed.
Printer is programmed as a journal.
Using OP key.
Department is programmed as a single item dept.
Using X mode to take out reports.
Bad or no batteries.
No power.
1
E01 appears on the display.
2
E08 appears on the display.
3
E94 appears on the display.
4
No date or time on receipt.
Paper is not advancing enough.
5
Key won’t turn to Z, X, PGM and RF modes.
6
Drawer opens up after ringing up only one
time.
7
Not clearing totals at end of day after taking
report.
8
Programming is lost whenever register is
unplugged or there is a power outage.
9
Register is inoperative.
Can’t get money out of drawer.
2.
Specifications
INPUT METHOD
Entry:
10-key system; Buffer memory 6 keys (2-key roll over)
Display (Digitron): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats; TOTAL; CHANGE
PRINTER
Receipt:
14 digits (Amount 10 digits, Symbol 4 digits)
(or journal)
Automatic paper roll winding (journal)
Paper roll:
58 mm
×
80 mm
∅
(Max.)
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries (3 UM-3, R6P (SUM-3) or LR6 (AM-3) type batteries) is
approximately one year from installation into the machine.
Power source:
AC 120V, AC (±10%) fixed.
Power consumption:
0.07A on stand-by; 0.11A maximum
Operating temperature:
32°F to 104°F (0°C to 40°C)
Humidity:
10 to 90%
Dimensions:
8 3/4"(H)
×
13"(W)
×
14 3/16"(D) with S drawer
(222 mm(H)
×
330 mm(W)
×
360 mm(D))
Weight:
9 lbs 4 oz (4.2 kg) with S drawer
Specifications and design are subject to change without notice.