SMK-Link Electronics Blu-Link™ NFC Speaker System 80 User Manual
Page 2
Pairing Button
Charging LED Indicator
Micro USB Charging Port
Pairing With Your Bluetooth
®
Phone or Tablet
Using the Audio Input Jack
Pairing with Bluetooth
®
-enabled devices such as the
Apple
®
iPhone
®
and iPad
®
just takes seconds:
1.
Turn speaker on by pressing and holding the Power Button
on the back of the speaker until the audio indicator light
flashes.
2.
Press and hold the Pairing Button until the speaker “beeps.”
3.
Turn on your device’s Bluetooth
®
wireless.
4.
Search for “NFC Speaker 80” and connect.
5.
Control your music volume or play/pause using either the
speaker controls or those on your device.
6.
To disconnect the Blu-Link
™
NFC Speaker from your phone
or tablet, simply disable the Bluetooth
®
connection on your
device or manually turn the speaker off by pressing and
holding the power button for 5 seconds.
To establish a wired connection with the Blu-Link
™
NFC Speaker,
connect a standard mini 3.5mm stereo audio cable from the
audio input jack on the back of the speaker to your device .
About Your Blu-Link™ NFC Speaker System 80
1.
Volume up
2.
Play / Pause
3.
Speakerphone
4.
Volume down
5.
Pairing button
6.
Bass tube
7.
Micro USB charging connector
8.
Power button
9.
3.5mm audio input jack
10. NFC Tag - Touch this area to
pair the speaker using NFC
11. Bluetooth
®
status indicator
/ Battery status indicator /
Bluetooth
®
pairing indicator
Charging The Battery
1.
Plug the USB charging cable into your mobile device’s USB/AC adaptor
and the adaptor into an AC outlet. Connect the other end of the USB cable
to your speaker’s Micro USB Charging Connector.
2.
When the battery is fully charged and the charger indicator
has gone off, disconnect the charger from the speaker before
you remove the AC adapter from the wall outlet.
You can also use a compatible USB cable to charge the
battery by connecting to a powered USB hub.
*When the Blu-Link
™
NFC Speaker battery is running low, the speaker will
quickly beep 4 times. Charge the battery using the steps above.
On - Not Paired
Flashes once approximately
every 5 seconds.
Pairing Mode
Flashes four times approximately
every second.
On - Paired - Not Playing Audio
Flashes twice approximately
every 5 seconds.
On - Playing Bluetooth Audio
Solid Blue
LED Status Indicator for Pairing Key