Tempest Tornado - Manual (Page 42)

Tornado Enclosure User Manual page 42
6 Closing up the
Enclosure
1 Check all electrical connections
2 Clear the enclosure and luminaire of all dust
and debris.
3 Check that the power switch on the
luminaire is in the ON position.
4 Complete DMX control connections,
following luminaire manufacturer’s
instructions.
5 Test luminaire
6 Safety cable the luminaire to the Fixture Tray
leg (horizontal and vertical enclosures).
7 Tie down cables (to luminaire or mounting
brackets) so that they will not touch heaters
or fans.
8 Replace the globe assembly on the Tornado
base. This requires two people.
