Xilica XPanel - Manual (Page 9)

XPanel User's manual - Page 9
5. Enter any description for the selected menu in the Display on LCD
textbox.
6. Select a Control for the selected menu.
7. Click on Data Min or Data Max to specify the data range for the
selected control, the min/max value is indicated in the dialog box.
8. For some modules you can also change the Data Step Size.
9. Click on Enable to link up to 16 devices and channels for the same
control.
10. Click Save Setup File to save the control settings, so you can
recall it for future usage.
11. Click on Program XPanel Devices on the menu strip to go to
the program menu.
12. Select the Computer IP Address, XPanel IP Address and
XPanel Device ID. Click Program XPanel to begin programming the
XPanel.
13. Follow the instruction on the progress bar to continue.
14. Click on Open Setup File to recall a configuration made earlier
to program into the next XPanel. To program repeat step 10 and 11.