Designing with the usb smart cable, Installation – Zilog Z8F0113 User Manual
Page 7
Z8 Encore! XP
®
F042A Series 8-Pin Development Kit
User Manual
UM018705-0508
Introduction
4
•
CD-ROM
•
One USB high-speed or full-speed port on the host chassis or a
powered Hub
Designing with the USB Smart Cable
Z8 Encore! XP
®
F042A Series 8-pin development kit uses the USB Smart
Cable provided in the kit. The Z8 Encore! Serial Smart Cable and
associated TIM will not work with the Z8F04A08100KITG kit. Include
the following when designing the target board and application:
•
The target design’s debug interface must include a RESET pin.
•
The target application must allow the RESET pin to be pulled LOW.
For more details, refer to Z8 Encore! XP
®
F082A Series Product Specifi-
cation (PS0228).
Installation
For details on software installation and setup of the Z8 Encore! XP
F042A Series 8-pin development kit refer to Z8 Encore! XP
®
F042A 8-
Pin Development Kit Quick Start Guide (QS0055).