Zilog Z8F1621 - Manual (Page 22)

In-Circuit Emulator
User Manual
UM016804-0208
19
2. In the Memory window, double-click the value you want to change
and type in a new value. (Values begin in the second column after the
Address column.)
3. Press Enter. The new value displays in red.
Refer to the ZDS II—Z8 Encore! User Manual on the ZDS II CD-ROM
and the ZDS II online help for further information on setting, filling, and
reading memory.
LED Indicators
There are three sets of dual LED indicators on the Z8 Encore! XP ® F64xx
Series ICE (see Figure 2 and Figure 5 ):
•
Dual LED D1 on the front panel indicates emulator status. If the top
LED is lit, the emulator is functioning normally. If the bottom LED is
lit, the emulator is not functioning properly. Contact technical support
at
http://www.zilog.com
for assistance.
•
Dual LED D2 on the rear panel indicates the status of internal volt-
ages. The top LED indicates that the 3.3 VDC voltage is okay. The
bottom LED indicates that the 1.8 VDC voltage is okay (you may
have to turn the ambient lighting off to see the status of the 1.8 VDC
LED). If either LED is not lit, contact technical support at
http://www.zilog.com
for assistance.
•
Dual LED D3 on the rear panel indicates Ethernet status. The top
LED indicates that the Ethernet connection is live (Link). The bottom
LED indicates that data is being transferred across the connected net-
work.