Zilog EZ80L92 - Manual (Page 59)

eZ80L92 Development Kit
User Manual
UM012913-0407 ZPAK II
55
ZPAK II
ZPAK II is a debug tool used to develop and debug hardware and
software. It is a networked device featuring an Ethernet interface and an
RS232 console port. ZPAK II is shipped with a pre-configured IP address
that can be changed to suit on a local network. For more information on
using and configuring ZPAK II, refer to the ZPAK II Debug Interface Tool
Product User Guide (PUG0015) and the eZ80L92 Development Kit Quick
Start Guide (QS0015).
ZDI Target Interface Module
The ZDI Target Interface Module provides a physical interface between
ZPAK II and the eZ80Acclaim!
® Development Platform. The TIM mod-
ule supports ZDI functions. For more information on using the TIM mod-
ule or ZDI, refer to the eZ80L92 Development Kit Quick Start Guide
(QS0015) and the eZ80L92 Module Product Specification (PS0170).
JTAG
Connector P1 is the JTAG connector on the eZ80Acclaim! ® Development
Platform. JTAG will be supported in the future eZ80
®
products.
Application Modules
ZiLOG offers the Thermostat Application module, which is used for
evaluating and developing process control and simple I/O applications.
The Thermostat Application module is equipped with an LCD display
that displays process control and other physical parameters. For more
information on Thermostat application, refer to the Java Thermostat
Demo Application Note (AN0104), available on
www.zilog.com .