D-Link XTREME G DWL-G820 - Manual (Page 17)

17
Using the Configuration Menu (continued)
IEEE 802.11g
Select Disabled or Enabled.
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
Click Apply to save changes.
Advanced > Encryption
Wireless Band-
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select WPA-PSK and enter a passphrase in the field below. Each
device on the network must have an identical passphrase to
communicate. Authentication-
Encryption-
Key Type-
Hexadecimal digits
consist of the
numbers 0-9 and
the letters A-F
ASCII (American
Standard Code for
Information
Interchange) is a
code for representing
English letters as
numbers from 0-127
Key Size-
Valid Key-
Apply-
Input up to four keys for encryption. You will select one of these
keys in the valid key field. Key Table-
Enter a passphrase when you have enabled WPA-PSK. PassPhrase-
Security type. Cipher Type-
Enter the interval after which the group key will be updated.
Group Key
Update Interval-