Aplex Technology AHM-6057A - Manual (Page 47)

AHM-6XX7A User Manual 47
Three options are available:
Disabled (Disable the feature)
Force GEN I (Enhance transfer speed to 1.5Gb/s, i.e., 150MB/s)
Force GEN II (Enhance transfer speed to 3.0Gb/s, i.e., 300MB/s)
PATA IDE Mode
The item allows you to configure PATA IDE mode. Setup option: "Secondary",
Select "Onboard Device" item and press "Enter" for setup of onboard devices, as shown by the
following figure:
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
USB Controller
[Enabled]
Item Help
USB 2.0 Controller
[Enabled]
USB Keyboard Support [Enabled] Menu Level►
USB Mouse Support [Enabled]
Azalia/AC97 Audio Select [Auto]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB Controller
This item allows you to enable or disable onboard USB controller. Options are: Enabled and
Disabled.
USB 2.0 Controller
This item allows you to enable or disable USB 2.0 feature of onboard USB controller. Options are:
Enabled and Disabled.
USB Keyboard Support
This item determines if USB keyboard is supported in MS DOS. Options are: Enabled and
Disabled.
USB Mouse Support
This item determines if USB mouse is supported in MS DOS. Options are: Enabled and Disabled.
Azalia/AC97 Audio Select
This item is used to select Audio mode.