BECKHOFF CB4060 - Manual (Page 60)

Chapter: BIOS Settings Advanced
page 60 Beckhoff New Automation Technology CB4060
5.3.8 USB Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ USB Configuration │Enables Legacy USB support. │
│ │AUTO option disables legacy │
│ USB Module Version 8.10.27 │support if no USB devices are │
│ │connected. DISABLE option will │
│ USB Devices: │keep USB devices available │
│ 1 Keyboard, 2 Hubs │only for EFI applications. │
│ │ │
│ Legacy USB Support [Auto] │ │
│ USB3.0 Support [Enabled] │ │
│ XHCI Hand-off [Enabled] │ │
│ EHCI Hand-off [Disabled] │ │
│ │ │
│ USB hardware delays and time-outs: │────────────────────────────────│
│ USB transfer time-out [5 sec] │→←: Select Screen │
│ Device reset time-out [10 sec] │↑↓: Select Item │
│ Device power-up delay [Manual] │Enter: Select │
│ Device power-up delay in seconds 5 │+/-: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
 USB Module Version
Options: none
 USB Devices
Options: none
 Legacy USB Support
Options: Enabled / Disabled / Auto
 USB3.0 Support
Options: Enabled / Disabled
 XHCI Hand-off
Options: Enabled / Disabled
 EHCI Hand-off
Options: Enabled / Disabled
 USB transfer time-out
Options: 5 sec / 10 sec / 20 sec
 Device reset time-out
Options: 10 sec / 20 sec / 30 sec / 40 sec
 Device power-up delay
Options: Auto / Manual
 Device power-up delay in seconds
Options: 1..40