Locking the vehicle, Unlocking the vehicle – Directed Electronics 1.3X User Manual

Page 20

Advertising
background image

20

© 2008 Directed Electronics. All rights reserved.

Locking the vehicle

To lock the vehicle, press the button on the remote control.

The horn in the vehicle “honks” one-time, and the parking lights flash one-time. If

the power door locks have been connected, the doors lock.

The system automatically checks for errors when it locks. The 2-way remote

honks one-time and then flashes the LED indicator to confirm locking. If no

lock confirmation is received, the remote emits the out-of-range signal.

If errors are found when locking:
If the door is open when you lock the vehicle, the horn honks once and the park-

ing lights flash. The horn then honks a second time to indicate that the door is

open and the LED on the control center flashes in groups of three

The 2-way remote control sounds a short “error” tone, and the LED indicators

next to the and buttons flash. Note: The optional horn honk and door input

has to be installed for this function.

Locking without the honk (Silent Lock)

Press the button on the remote one-time, and then press the button. The

vehicle locks without the confirmation honk. The parking lights flash one-time.

The 2-way remote flashes the LED to confirm locking. If no lock confirmation

is received, the 2-way remote emits the out-of-range signal.

Unlocking the vehicle

Lock the vehicle normally. Press the

button one time. The vehicle horn honks

two-times and the parking lights flash. The 2-way remote beeps two-times and

the LED indicator flashes. The door locks, if connected, unlock. If no unlock

confirmation is received, the 2-way remote emits the out-of-range signal.

UnLocking without the honk (Silent Unlock)

Lock the vehicle normally. Press the button on the remote one-time, and then

press the

1

3
4
5
6

2

A U

X

button. The vehicle unlocks without the confirmation honk. The

parking lights flash two-times. The 2-way remote flashes the

1

3
4
5
6

2

A U

X

LED to confirm

unlocking. If no unlock confirmation is received, the 2-way remote emits the

out-of-range signal.

Advertising