Step 16 step 17 – Blu Bathworks TEE300 User Manual
Page 14
2015-05
1 866 907 0122 blubathworks.com
Step 16
Step 17
Connect an all-pole mains switch in the
electrical installation in accordance with
the current wiring regulations.
Note:
• the electrical installation and testing must be
carried out by a qualified electrician
• Electrical connections and the minimum
distances between water and electricity
connections must be installed or laid out in
accordance with the valid national regulations.
• Equipment for protection against faulty currents
must be installed (residual current circuit
breaker), N=30mA
• All work on the electronic components must be
only carried out under absence of voltage
Note: Damages to the faucet resulting from incorrect handling and installation are not covered in the manufacturer’s warranty.
Refit the control box cover.
Disp
lay
15V
Battery
WLAN
Valve
Controlle
r Dual
Wheel