Code CortexOPOS - Manual (Page 8)

8
D008736_01 CortexOPOS User Manual
10.0 - Adding a RS232 Reader (or Modem) to the CortexOPOS™ Device Manager
1. Open the CortexOPOS™ Device Manager.
2. Plug the reader, or CodeXML ® modem, into the computer serial
port. (Scan the QuickConnect Code™ on the modem.)
3. Select the “Root” menu, then “Add Device”.
4. Select Serial from the Port Mode list options:
5. Select the desired RS232 port number and baud rate. Modify
the “Device Name” as desired. Press “Finish” to save changes.
A prompt box will appear asking the user to confirm the changes.
Press “Yes” to confirm.
Note that all RS232 CortexOPOS™ devices behave as generic
devices, and are not tied to any particular reader hardware and/
or serial number.