Code CR1000 - Manual (Page 8)

8
C005905_06_CR1000_UserManual
11.0 - CR1000 Hole Mounting Pattern
10.0 - Reader ID and Firmware Version
A text string indicating the firmware version and CR1000 ID number will be displayed.
example: Xap/i06760456none0020094903A06000000700070016006200 02cd(13.2.18) (see below):
To find out the Reader ID and Firmware version, open a text editor program
(i.e., Notepad, Microsoft Word, etc.) and read the Reader ID and Firmware
configuration barcode.
Reader ID and Firmware
Note: Code will periodically release new firmware for CR1000 readers. For information on latest firmware visit our website at
www.codecorp.com/codesupport.php.
Display
type Flash file system
version number Hardware
revision Hardware type
identifier Boot
application
version Operating
system kernel
version Root file
system
version Decoder version ASCII TAB
character
Xap/ i 0808 0808 none 0020094903 A 06 0 0000 0700070016 0062 0002 cd(13.2.18) ○
Firmware
version Boot firmware
version Radio firmware
version Reader serial
number (ten digits) Current
execution state String
output OEM
identifier
○
NOTE 1:
Locating holes are 2 mm in
diameter, hole depth is 1.5 mm.
NOTE 2:
Mounting inserts are M3-.5 internal
thread, 3.8 mm length.
10.36 mm
15.53 mm
34.08 mm
31.12 mm
30.20 mm
27.01 mm