DFI ST101-CP - Manual (Page 4)

4/9
4. After removing the drive bay
cover, on the top side of the
bracket, position the optical drive
as shown on the right.
5. Secure the optical drive by
fastening screws on each side of
the drive bay bracket.
SATA
connector
Optical drive
SATA
Rear view of the optical drive
SATA
Optical drive
3. The 2 screws are used to secure
the drive bay cover. Remove these
screws and the drive bay cover.
Put them in a safe place for later
use.
Drive bay cover