DFI CP337-NRM - Manual (Page 33)

33
2
Hardware Installation
1
DVI-I Port
DVI-I
The DVI-I port is used to connect an LCD monitor. This port supports DVI-D sig-
nal only.
Connect the display device’s cable connector to the DVI-I port. After you plug the
cable connector into the port, gently tighten the cable screws to hold the connec-
tor in place.
BIOS Setting
Configure the display device in the Advanced menu (“Video Function Configura-
tion” submenu) of the BIOS. Refer to chapter 3 for more information.