Diamond Amplification Assassin - Manual (Page 5)

ASSASSIN OWNER’S MANUAL
PAGE 2 OF 5
Speakers. Your DA product comes equipped with three speaker jacks. Always ensure,
when connecting speakers, that you use a high quality speaker cable. Never use instrument
cable to connect your amp to speakers and never put effects between your amp and
speakers.
If you are using one speaker cabinet, you can plug into either of the 8ohm speaker jacks if
your cabinet is 8ohms, or the 16ohm jack if your cabinet is 16ohms. If you are unsure of the
impedance of your speaker cabinet, please find out before making your connection.
If you are using two speaker cabinets, you should use the two 8ohm jacks.
Never use your amp without a load! Doing so is likely to damage your amp!
Instrument. Plug your guitar into the input jack.
POWER/STANDBY
Always keep the Power switch off when unplugging and plugging in to your power source.
Once the amp is turned on (the jewel light will illuminate to indicate power is on), and when
you have made all the appropriate connections, take the amp off standby. Allow the amp to
warm up for several minutes before playing for optimal result.