DNF Controls 4000CL-MAV - Manual (Page 13)

13 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555
ST300 SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY
SOFTWARE
VERSION
The version number for the currently installed software is displayed.
SYNC ON/OFF Set to ON if black burst is supplied to the Ref Video connector on the rear
panel. Set to OFF if no black burst is supplied.
VIDEO STANDARD Sets Video Standard option to NTSC when [NTSC] is pressed.
OR
Sets Video Standard option to PAL when [PAL] is pressed.
RECALL
NORMAL/REDIRECT
Press [NORMAL] or [REDIR] (redirect).
NORMAL –
The cue point will load on the learned VTR.
REDIR –
When one only one clip is learned into a Cue Point, the Clip will be
REDIRECTED to load on the currently selected VTR.
RECORD Press Softkey to select single button or 2-button record.
RECORD = [REC] Only OR [REC] + [PLAY].
TRANSMIT CUELIST Transmit cuelist to another ST300 or to a PC.
RECEIVE CUELIST Receive cuelist from another ST300 or PC.
ST300 SETUP
Clear Cues SetDefault