Feelworld DP701T - Manual (Page 4)

4
② . Rear Case and USB Signal Input Port
1--- 1/4 inch thread fixed hole
2--- B type mini USB input port, USB signal input
3--- A type USB extension port, can be used as a mouse, keyboard,
or U disk expansion port
4--- VESA(75*75mm) Mounting Installation Fixed Hole(optional)
2. Connections and Installation
① .
USB monitor doesn’t require any additional power source except USB.
So that need require the USB ports on PC can supply current which is not less
than 400mA. Attached
Y type USB cable has 3 USB input port, 2 A type and 1
B type mini USB port. 2 A type USB Port connect the PC USB port, B type mini
USB port connect to the port in the monitor.
Attached
Y type USB cable:
1 2 3
1. A type USB Port, power and data transmission, connect to the USB
port of the PC.
2. A type USB Port, power and data transmission, connect to the USB
port of the PC. (optional)
3. B type mini USB input port, connect to USB monitor input port.
Please use the two A type USB plug into the PC to the USB port to ensure