Feelworld EVF E-350 - Manual (Page 9)

8
3. Menu operation instruction
After power connected, connect the HDMI signal, dial the power switch to
“ ” position, the viewfinder enter into working state, press “MENU” to pop up
it, use “ ”or“ ” to select menu item, press “MENU”button to confirm, then
use “ ”or“ ”to select the adjust submenu item, after use “MENU”button to
confirm, then use “ ”or“ ” to adjust the value, press “MENU” or
“EXIT”button can exit the adjustment state, exit main menu press
“EXIT”menu.
● Menu instruction
（ Color）
※ Brightness: To adjust the image's brightness.
※ Contrast: To adjust the brightest and darkest ratio of the image,
please note the sense of picture when adjust, proportion too
large or small, will make the picture lose the color of showy.
※ Hue：On NTSC Video mode, the image color tint difference is
adjustable by tint.
※ Saturation：To adjust color concentration
※ Color temp: Enter into (color)menu, press" ”or“ ”on the
unit to confirm, press “ ”or“ ” to select the form of color