Flowserve PMV D3 Digital Positioner - Manual (Page 23)

23
FULL MENU
STATUS
OK
OK
STATUS
o o service
The Status Menu is used to select whether or not the positioner is in service.
The menu contents are shown in
the figures on the right and the various
texts are described below:
o o service Not in service. Flashing
indicator in upper left-
hand corner of display.
in service Positioner in service.
Critical parameters
cannot be changed. When changing between
In service and Out of ser-
vice, the OK button must be
depressed for 3 seconds.
STATUS
in service