Dynex DX-19L200A12 - Manual (Page 17)

Making connections
13
DX-19L200A12
Connecting a camcorder or game console
To connect a camcorder or game console:
1 Make sure that your TV’s power cord is unplugged
and the camcorder or game console is turned off.
2 Connect a composite cable (not provided) to the
VIDEO and L(MONO) AUDIO and R audio jacks on
the back of your TV and to the AV OUT jacks on the
camcorder or game console.
To play from the camcorder or game console:
1 Turn on your TV, then press INPUT to open the
INPUT SELECT list.
2 Press or to select Video, then press ENTER.
3 Turn on the camcorder or game console, then set it
to the output mode. See the documentation that
came with the device for more information.
Connecting a computer
Using VGA
To connect a computer using VGA:
1 Make sure that your TV’s power cord is unplugged
and the computer is turned off.
2 Connect a VGA cable (not provided) to the PC
MONITOR IN jack on the back of your TV and to the
VGA jack on the computer.
3 Connect an audio cable with stereo mini plug (not
provided) to the PC/DVI AUDIO IN jack on the back
of your TV and to the LINE OUT or AUDIO OUT jack
on the computer.
To play video from the computer:
1 Turn on your TV, then press INPUT to open the
INPUT SELECT list.
2 Press or to select PC, then press ENTER.
3 Turn on the computer and adjust the display
properties if necessary.
Tip
Some camcorders and game consoles have an HDMI
jack. You can use an HDMI cable to connect the
device for a better picture.
Note
When you connect the audio using the L(MONO)
AUDIO and R audio jacks, the audio output is analog.
VIDEO IN
Back of TV
Camcorder or
game console
Cables are often color-coded to match color-coded jacks.
Connect yellow to yellow, red to red, and white to white.
Composite cable
Tip
Some computers have an HDMI jack. You can use an
HDMI cable to connect the computer for a better
picture.
PC/DVI
AUDIO IN
Back of TV
VGA cable
Audio cable with stereo mini plugs
DX-19L200A12_11-0606 MAN_ENG_V1.book Page 13 Thursday, November 3, 2011 10:06 AM