General – Fronius Transceiver Card User Manual
Page 17
3
EN-US
General
Principle
The Wireless transceiver card and the Wireless transceiver box are used to transmit
data wirelessly between the DatCom system and end devices. This also enables an easy
wireless installation of DatCom in situations where laying cables would be prohibitive.
Changes or modifications of the radio module not expressly approved are not allowed
and will void the user’s authority to operate the equipment.
RFID modules in the USA require FCC certification:
This RFID module corresponds to part 15 of FCC rules and regulations. It
operates under the following conditions:
1.
The RFID module may not cause harmful interference.
2.
The RFID module must absorb any electromagnetic interference recei-
ved, especially electromagnetic interference that could impair operation.
FCC ID: QKWFRF905
Notes Regarding
Radio Certification
For Europe, certification is through CE: