D-Link DI-634M - Manual (Page 22)

22
DI-634M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
DHCP stands for Dynamic Host Control Protocol. The DI-634M has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
DI-634M. The DHCP Server will automatically allocate an unused IP address from the
IP address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
Select Enabled or Disabled. The default setting is Enabled.
The starting IP address for the DHCP server’s IP
assignment.
The ending IP address for the DHCP server’s IP assignment.
IP address specific to the client.
Enter the MAC Address.
Select a DHCP client from the pull-down list; click Clone to
copy that MAC Address.
DHCP
DHCP Server:
Home > DHCP
Starting IP
Address:
Ending IP Address:
IP:
MAC Address:
DHCP Client: