D-Link DES-3208 - Manual (Page 48)

10/100 Fast Ethernet Switch User’s Guide
34
Using the Console Interface
First Time Connecting To The Switch
The Switch supports user-based security that can allow you to prevent
unauthorized users from accessing the Switch or changing its settings. This
section tells how to log onto the Switch.
Note: The passwords used to access the Switch are case
sensitive; therefore, “S” is not the same as “s.”
When you first connect to the Switch, you will be presented with the first
login screen (shown below). Press Ctrl+R (hold down the Ctrl key,
press the R key, and release both keys) to call up the screen, if the
first login screen does not appear. Also Ctrl+R can be used at any
time to refresh the screen.
Figure 6-1. Initial Screen, first time connecting to the Switch
Move the cursor to OK and press Enter (Note: Leave the User Name and
Password fields blank). You will see the Main Menu shown below: