Grandstream GXP1100 User Manual - Manual (Page 50)

FIRMWARE VERSION 1.0.8.4 GXP1100/GXP1105 USER MANUAL Page 48 of 53
UPGRADING AND PROVISIONING
The GXP1100/GXP1105 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for
the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or
HTTP; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
There are two ways to setup a software upgrade server: The IVR Menu or the Web Configuration
Interface.
UPGRADE VIA IVR MENU
Follow the steps below to configure the Upgrade Server IP address via IVR:

Pick up the handset, press *** to access the IVR Menu;

Input menu option 15 for "Upgrading Protocol". Then press 9 to toggle between different upgrading
methods;

Press # to return to the main menu and input menu option 13 for "Firmware Server IP Address";

Input the 12-digit firmware upgrade IP address. For example, if the firmware upgrade IP address is
10.0.50.191, input 010000050191.
Then reboot the phone. The LED indicator on the top right corner will turn orange and red and then turn off
which indicates the phone has restarted. After a while the indicator will blink in red meaning the download
is in process. When upgrading is done you will see the phone restarts again. Please do not interrupt or
power cycle the phone when the upgrading process is on.
UPGRAGE VIA WEB GUI
Open a web browser on PC and enter the IP address of the phone. Then, login with the administrator
username and password. Go to Maintenance->Upgrade and Provisioning page, enter the IP address or
the FQDN for the upgrade server in "Firmware Server Path" field and choose to upgrade via TFTP or
HTTP/HTTPS. Update the change by clicking the "Save and Apply" button. Then "Reboot" or power cycle
the phone to update the new firmware.
The indicator on the top right corner will turn orange and red and then turn off which indicates the phone