Grandstream GXP1450 User Manual
Page 12
GXP1450 User Manual
Page 11 of 38
Firmware 1.0.1.66 Last Updated: 05/2011
1. D
IAL
:
To make a phone call.
• Take Handset/SPEAKER/Headset off-hook
or press an available LINE key (activates speakerphone)
or press the NEW CALL soft-key
• The line will have a dial tone and the primary line (LINE1) LED is red
If you wish, select another LINE key (alternative SIP account)
• Enter the phone number
• Press the SEND key
or press the “DIAL” softkey
2. R
EDIAL
: To redial the last dialed phone number.
When redialing the phone will use the same SIP account as was used for the last call. Thus, when
the second SIP account was made for the last call/call attempt, the phone will use the second
account to redial.
• Take Handset/SPEAKER/Headset off-hook or
press an available LINE key (activates speakerphone), the corresponding LED will be red
• Press the SEND button
or press the REDIAL softkey
3. U
SING THE CALL HISTORY
:
To call a phone number in the phone’s history.
When using the call history, the phone will use the same SIP account as was used for the last
call/call attempt. Thus, when returning a call made to the second SIP account, the phone will use the
second SIP account return the call.
• Press the MENU button to bring up the Main Menu
• Select Call History and then “Received Calls”, “Missed Calls” or “Dialed Calls” depending on
your needs
• Select phone number using the arrow keys
• Press OK to select
• Press OK again to dial
4. U
SING THE PHONEBOOK
: To call a phone in from the phone’s phonebook.
Each entry in the phonebook can be attached to an individual SIP account. The phone will use that
SIP account to make the phone call.
• Go to the phonebook by:
i. Pressing the phonebook button (bottom, left-hand side of phone), or
ii. Pressing the DOWN arrow key, or
iii. Pressing the menu button and
Selecting “Phone Book” and
Press MENU
• Select the phone number by using the arrow keys
• Press OK so select
• Press OK again to dial
5. P
AGING
/I
NTERCOM
:
The paging/intercom function can only be used if the SERVER/PBX supports this feature and both
the phones and PBX are correctly configured.
• Take the Handset/SPEAKER/Headset off-hook
• Select the LINE key associated with account
• Press OK key to display LCD: LINEx: PAGE
• Dial the phone number you want to Page/Intercom