Gullco GP-250 - Manual (Page 16)

14
GP-175-030 Automatic gun positioning support stand assembly. This kit provides an internal
wiring harness; a 24 VAC output relay and quick connect receptacle circuit board
assembly; a 24 VAC pneumatic solenoid valve complete with control cable with
mating quick connect plug; a 4” [101mm] stroke pneumatic gun positioning slide;
a semi-automatic adjustable gun clamp assembly; a free-standing/bolt-down
support stand, a 1-1/2” [38.1mm] micro-fine rack box and rack arm assembly for
vertical adjustment; a 1-1/2” [38.1mm] micro-fine rack box and rack arm assembly
for horizontal adjustment; a 1-1/8” [28.6mm] micro-fine rack box and rack arm for
horizontal cross adjustment; and an adjustable cable/hose clamp assembly. It is
used to clamp and position the welding gun for repetitive operations as well as
providing automatic gun extension at the start of each automatic cycle and
automatic gun retraction at the end of each automatic cycle to facilitate easy
loading and unloading of the work-pieces.
GP-200-024 Run/Stop footswitch assembly for manual operation. This kit provides a run/stop
footswitch; a footswitch guard cover; a connecting control cable; and strain relief
glands. When activated, the footswitch will provide a run signal to the control
allowing manual rotation when the control is in manual mode (the footswitch has
no affect in automatic mode).
GP-200-016 12” [305 mm] Diameter mounting table. This round mounting table is used to
facilitate direct mounting of components or fixtures and provides six (6) radial
mounting slots and various three (3) hole pitch circle bolt patterns. The mounting
table is quickly and easily mounted on the positioner spindle flange.
GP-300-002 Same as GP-200-016 except that there is a 2.50” diameter centre hole for the
through bore GP-350 positioner.
WPG-250 Gullco Self-Centering Welding Grippers are quickly and easily mounted on the
positioner spindle flange. They are slim but rugged, weighing only about half of
that of a standard chuck, minimizing reduction in positioner capacity. A single
lever provides smooth, positive, self-centering open/close action.
External clamping range = 0.38" [10mm] to 11.25" [286mm]
Internal clamping range = 4.25" [108mm] to 15" [381mm]
Weight 20 Lbs. [9 Kg.]
KR-1000 CSB A free standing support and cutting torch holder assembly. 1-1/8" [28.6mm]
square rack arms and rack boxes provide 11-1/2" [292.1mm] of vertical
adjustment and 10-1/2" [266.7cm] of horizontal adjustment. Supplied with swivel
mounted, standard rack-type cutting torch holder.
KR-2000 CSB Same as above, except uses 1-1/2" [38.1mm] rack arms and rack boxes and
provides 7-1/2" [190.5mm] of vertical and 6-1/2" [165.1mm] of horizontal
adjustment.
KR-1000 WSB A free standing support and welding gun holder assembly. 1-1/8" [28.6mm]
square rack arms and rack boxes provide 11-1/2" [292.1mm] of vertical
adjustment and 10-1/2" [266.7mm] of horizontal adjustment. Supplied with swivel
mounted, adjustable gun holder assembly.