Guntermann & Drunck UserCenter8 - Manual (Page 6)

Guntermann & Drunck GmbH Operating Instructions UserCenter8
Page 3
5 Operation
The changeover between the active workstations is automatic. Should a
workstation access the computer using the keyboard or the mouse, the other
workstations are blocked for the duration of this access plus the set time-out
period.
The time-out period, which is set by the manufacturer, lasts approximately 1
second. This period can, however, be extended to 90 seconds.
All of the connected monitors show the image of the connected computer at all
times.
When none of the workstations accesses the computer, the UserCenter is
released so that access can be afforded to every workstation.
5.1 Switching
The UserCenter8 allows the selectable operation of the computer from 8
consoles.
In default both keyboards and mice are enabled.
As soon as at one of the consoles there is keyboard or mouse action
keyboard and mouse of the other station are disabled.
After a time out of approx 1 second where there is no action the system is
enabled again.
The time out between the switching can be adjusted to your needs (
see
chapter 6.10 ).
Both connected monitors show simultaneously the picture of the computer.
5.2 Manual Hold function
The UserCenter8 makes it possible that one of the 8 consoles has access to
the computer. This prevents that the system enables the other console after a
preset time out of approx 1 second.
By pressing
CTRL and PRINT the hold function is enabled.
The enabled hold function is indicated