Guntermann & Drunck UserCenter2/4 - Manual (Page 16)

Guntermann & Drunck GmbH Operating Instructions UserCenter 2 (4)
Page 13
6.14 Mouse-enable (manually)
With this function you can manually establish a mouse-enable (on other
Operating Systems than Windows).
For the manual mouse-enable proceed as follows:
• Call up the setup mode with CTRL + BACKSPACE
The setup mode will be indicated by the flashing of the three keyboard
LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock).
Then press the corresponding key:
Used mouse driver
Key
Enable for standard mouse driver M
Enable for Intelli driver I
Enable für Intelli Explorer driver E
After having set the manual mouse-enable the setup mode will be closed
automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing
ESC .
6.15 Mouse-reset (manually)
Choose FUNCTION on your Windows operating system;
Independend from the selected mouse driver.
This is for:
WIN 98, WIN NT, WIN ME, WIN 2000, WIN XP.
With this function a manual mouse-reset can be set.
For the manual mouse-reset proceed as follows:
• Call up the setup mode with CTRL + BACKSPACE
The setup mode will be indicated by the flashing of the three keyboard
LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock).
• For disabling the manual mouse-reset again press R
After the manual mouse-reset is enabled/disabled the setup mode will be
closed automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing ESC .