IHSE USA 485 Series Repeater and Cross Repeater - Manual (Page 21)

Description
2014-04-15
21
3.7 Status LEDs
Pos: 25 /806-IHSE/Beschreibung/Diagnose LEDs/485-xx @ 11\mod_1395154726794_6.doc @ 141055 @ 3 @ 1
3.7.1 Status (Cross) Repeater Module
The (Cross) Repeater module is fitted with a multi color LED for overall
status indication and with two further LEDs for indication of the connection
status.
Module
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Rear View Rear View
LED 1/2 and 4/5: Connection Status
Pos. LED Status Description
Off Connection available 1/4 Failure LED
(green)
On or
Flashing Connection failure (flashing for about
20 s following a connection failure)
Flashing No connection via interconnect cable 2/5 Status LED
(green)
On Connection available
LED 3: Device Status
LED color Description
Red Device ready
Blue
Link 1 (left connector) available, Link 2 (right
connector) not detected
Green Link 2 (right connector) available, Link 1 (left
connector) not detected
Light Blue
Link 1 (left connector) and Link 2 (right connector)
available
Pos: 26 /806-IHSE/Installation/UEB_Installation @ 5\mod_1278574971589_6.doc @ 41768 @ 1 @ 1