ILS ILS21H - Manual (Page 12)

ILS21HL INSTRUCTIONS MANUAL
ILS21 HL Page 11
Multi-card reader
The ILS21HL is equipped to offer maximum data exchange flexibility. A wide range of industry
standard SD cards can be read by the internal processor of the ILS21H. It should be noted that
the card reader is not equipped with a spring lock. Therefore the card should not be pushed; it
will fit in only with careful positioning. If the lectern does not recognize the hardware, the card
should be reinserted again. Figure 11 shows the various card types which can be inserted.
F IGURE 11
USB ports
The 4 USB ports on the front panel are available for the user memory sticks at the same time.
For their usage, the mode should not be changed with the ILS21-notebook switch. If the PC
does not recognize the user's USB input and the device has already been checked, the internal
connections inside the lectern will require inspection (Figure 12).
F IGURE 12