Jetway Computer NC9S - Manual (Page 43)

38
[Disabled]: PCIe ASPM will be programmed before OpROM.
PEG De-emphasis Control
Use this item to configure the De-emphasis control on PEG.
The optional settings are: [-6 dB]; [-3.5 dB].
PEG ASPM
Use this item to control ASPM support for the PEG device. This has no effect if
PEG is not the currently active device.
The optional settings are: [Disabled]; [Auto]; [ASPM L0s]; [ASPM L1]; [ASPM
L0sL1].
► Memory Configuration
Press [Enter] to view current memory configuration or make settings for the
following sub-item:
Memory Frequency Limiter
Use this item to set maximum memory frequency selection in Mhz.
The optional settings are: [Auto]; [1067]; [1333]; [1600]; [1867].