Kleenmaid TO851X - Manual (Page 8)

Cooking
You can start cooking in just a few simple moves.
Switch on the oven.
Choose cooking function.
Change the default temperature if
you wish, or just wait 4 seconds to
accept the default temperature.
After 4 seconds the electronic controller automatically switches on the oven. The degrees centigrade symbol
flashes to show that the oven is warming up.
The cooking time symbol appears on
the display to show that the oven is
working.
The oven beeps and the degrees centigrade symbol stops flashing when the oven
reaches the set temperature. You can now put in the food you want to cook.
!
Important - The oven switches itself off automatically if you do not select a cooking
function within 8 seconds of switching the oven on. If this occurs, the time display
reads ‘OFF’ and the oven beeps to tell you that it has switched off.
Using the oven light
The oven is equipped with an intelligent light control to reduce electricity consumption. The light stays on while
the oven is warming up and for 3 minutes after set temperature is reached, and then switches off. Press any
key to check on the food in the oven. The light comes on for another 3 minutes.
Child lock
Your new electronic oven has a child lock function to prevent young children from tampering with it or
accidentally switching it on. You can activate the child lock at any time, even when the oven is switched off.
Activating the child lock
Press and hold the ‘On/Off’ key for at least 3 seconds.
The time display shows followed by
The electronic controller is now disabled. All you can do with the controls is switch the
9111 TO851 Use and Care.indd 8 28/4/08 12:07:37 PM