Operating your dishwasher, Starting your dishwasher, Important – Dacor DDWF24S User Manual

Page 12: Standby mode, Stopping your dishwasher during operation

Advertising
background image

10

Operating Your Dishwasher

Starting Your Dishwasher

important

If the dishwasher drain line is connected to

a garbage disposal, run the disposal before

operating the dishwasher for proper drainage.

Open the door and push in on the

1.

main power switch on the top of the

door so that it is in the on position.

The control panel on the front of the

dishwasher is lit when the switch is on.
Close the door. Push in gently on the top of the

2.

door until it clicks shut.
Push the

3.

PROGRAM button repeatedly until the

indicator for the desired wash cycle is lit. See the

facing page for a description of the various wash

cycles.
If you want to change the temperature

4.

setting, push the

TEMPERATURE

button repeatedly to toggle between

the “normal” setting and the “economy”

setting. The temperature setting indicator is lit

when the temperature is set to normal. See the

facing page for a description of the temperature

settings.
Push the

5.

START/STOP button.

note

The indicators around the

START/STOP

button gradually light up as the cycle

progresses. When the cycle finishes, all the

indicators are lit. They turn off automatically

after two hours.
If power to the dishwasher is switched off at

the main power switch or there is a power

outage before the wash cycle is complete,

the selected cycle will continue when the

power comes back on. However, if power

is interrupted or the door is opened during

drying, the cycle will end.
In hard water areas, both the dishes and the

machine can develop a white or gray film after

a while. This can be removed by replacing the

pre-wash detergent with two tablespoons of

citric acid.

Standby Mode

Once the cycle is finished, the dishwasher draws a

very small amount of power. Open the door and push

the main power switch to turn power off completely.

Stopping Your Dishwasher During

Operation

Push the

START/STOP button for three seconds.

The dishwasher will stop operating.

Control Panel on Front of Door

Start/Stop

button

Program button

Temperature button

Temperature setting indicator

Rinse and Hold indicator

Normal Wash indicator

Heavy Wash indicator

Quick Wash indicator

Advertising