Vertex Standard VX-264 User Manual
Page 22
20
VX-264 O
perating
M
anual
a
dVanced
o
Peration
Vox s
et
You can manually adjust the VOX Gain using this function:
r
Press, (or press and hold), the assigned PF key. A tone
will sound, and the current VOX Gain level will ap-
pear on the display.
r
Press the [A]/[B] button to select the desired VOX
Gain level.
r
Press the [D] key to store the new setting. The display
indicates “-.SAVED.-” briefly, then reverts to the nor-
mal channel indication.
You may cancel the new setting by pressing the [C]
key. In this case, the display indicates “-.CANCEL.-”
briefly.
Vox a
nti
-t
riP
Press, (or press and hold), the assigned PF key to toggle
the VOX Anti-Trip feature “On” and “Off”.
When the VOX Anti-Trip feature is set to “On”, the trans-
ceiver does not activate a VOX transmission from picking
up receive audio or from a radio alert tone (beep sound).
When the VOX Anti-Trip feature is “on” and “off”, the
display indicates “ATRP.ON” and “ATRP.OFF” briefly.
e
mergencY
The VX-264 includes an “Emergency” feature which may
be useful for alerting another party monitoring on the
same frequency as your transceiver’s channel.
Press and hold the assigned PF key for a pre-programmed
period to initiate an emergency call on the pre-defined
channel. The “-.EMG.-” indication will be indicated on
the display. For further details contact your Vertex Stan-
dard dealer.
To revive the radio from the Emergency mode, just press
and hold again the assigned PF key or turn off the radio.
l
one
W
orKer
Press, (or press and hold), the assigned PF key to activate
the Lone Worker feature. The Lone Worker feature is
designed to emit an alarm for 30 seconds when the Lone
Worker Timer (programmed by your Vertex Standard
dealer) has expired.
Press again, (or press and hold again), the assigned PF
key, the Lone Worker feature is disabled. If the user does
not reset the timer by pressing the PTT switch, the radio
switches to Emergency mode.
When the Lone Worker feature is activated, a small dot
(“”) will be indicated at the bottom left of the display.