KIP 7170K - Manual (Page 53)

Chapter 3 Error Correction 3-7
3. Remove the mis-fed paper pulling frontward.
4. Gently close the Engine Unit.
5. Replace Print Trays in the original position.
mis-fed media
NOTE
(1) Be sure to close the Engine Unit firmly until it locks at the correct position.
(2) The mis-feed cut sheet should be replaced with a new one if its leading edge has a torn
or fold. Or it should be used upside down to keep the damaged edge from been inserted.
An extremely creased cut sheet may cause mis-feed again.
1
1 1