Kreg DK1100 Single-Spindle Electric Pocket-Hole Machine - Manual (Page 3)

R
Warranty Information
2
WARRANTY
DK SERIES - FULLY AUTOMATIC POCKET HOLE MACHINES
Kreg Tool Company warrants to its authorized distributors of Kreg products and the original purchasers from such distributors, the #DK1100 & #DK3100
Pocket Hole Boring Machines to be free of defects in materials and workmanship for a limited 5 year warranty from the date of delivery to the original
purchaser. During said warranty period Kreg will, at its option, repair or replace any product (or component part thereof) proving defective during said
period. This warranty applies only to products which are used in accordance with all instructions as to operation, maintenance and safety set forth in
catalogs, manuals, and/or instruction sets furnished by Kreg Tool Company.
This warranty becomes effective only if the accompanying card or online form (www.kregtool.com) is fully and properly completed and returned to Kreg Tool
Company within ten (10) days from date of delivery to the original purchaser.
The drill guide will carry a lifetime warranty.
This limited warranty of fi ve (5) years does not apply towards the motor and other “working parts” of the machine. These items will carry a one (1) year
warranty from the date of delivery to the original purchaser.
This warranty does not apply to items that would normally be consumed or require replacement due to normal wear (drill bits, lubricants, etc.); for the cost
of removal of components if such removal is authorized by Kreg Tool Company; for shipment to Kreg Tool Company’s repair facility; or for reinstallation.
This warranty is null and void if the product has been subjected to (1) misuse, abuse or improper service or storage; (2) accident, neglect, damage or other
circumstances beyond Kreg Tool Company’s control; (3) modifi cations, disassembly, tampering, alterations or repairs outside of Kreg Tool Company’s
factory not authorized by Kreg Tool Company; (4) to any product not bearing its original serial number plate; and (5) for non-original purchasers. This
warranty does not apply to normal wear and tear, corrosion, abrasion, or repairs required due to natural causes or acts of God.
To obtain warranty service contact the distributor from which this Pocket Hole Boring Machine was purchased, or you may contact Kreg Tool Company
directly. Proof of purchase will be required before remedy will be provided under the terms of this warranty. Kreg Tool Company assumes no responsibility
for products which are returned without prior authorization. Kreg Tool Company’s obligations under this warranty shall be exclusively limited to repairing or
replacing (at Kreg Tool Company’s option) products which are determined by Kreg Tool Company to be defective upon delivery at Kreg Tool Company’s
factory, and on inspection by Kreg Tool Company. Under no circumstance shall Kreg Tool Company be liable for incidental or consequential damages
resulting from defective products, nor shall Kreg Tool Company’s liability exceed the purchase price paid for the product by the original purchaser.
This is Kreg Tool Company’s sole warranty. Any and all other warranties which may be implied by law, including any warranties for merchantability or fi tness
for a particular purpose, are hereby limited to the duration of this warranty. Kreg Tool Company shall not be liable for any loss, damage or expense directly
or indirectly related to the use of its products or from any other cause or for consequential damages (including without limitation, loss of time, inconvenience,
and loss of production). The warranty contained herein may not be modifi ed and no other warranty, expressed or implied, shall be made by or on behalf of
Kreg Tool Company.
Please register your warranty by sending warranty registration card.
Warranty service will not be provided without registration.
Keep a copy of this form for your records.
For your records the following information will be useful in the event warranty service is required. For complete
records attach copy of purchase invoice to this form.
Date of Purchase: / /
Purchased From:
Serial Number:
(serial number is located on front edge of work surface plate)
Kreg Tool Company • 201 Campus Drive • Huxley, IA 50124 • 1.800.447.8638
R
PLEASE DO NOT RETURN MACHINE BACK TO DEALER IF WARRANTY ISSUES ARISE.
CONTACT KREG TOOL COMPANY AT THE ADDRESS OR PHONE NUMBER BELOW.