Dyna-Glo RMC-KFA210T - Manual (Page 14)

13
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
H .) FUEL FILTER
CLEAN OR REPLACE TWICE A HEATING SEASON OR AS NEEDED.
(For RMC-KFA 45T/65T/120T/170T Models Only)
- Remove side cover screws using medium phillips screwdriver.
- Remove side cover.
- Pull fuel line off fuel filter neck.
- Turn fuel filter 90 to counter clockwise and pull to remove(RMC-KFA45T/65T Models).
- Turn fuel filter 90 to clockwise and pull to remove(RMC-KFA120T/170T Models).
- Wash fuel filter with clean fuel and replace in tank.
- Attach fuel line to fuel filter neck.
- Reinstall side cover.
Figure 20.
(For RMC-KFA 210T Model Only)
- Remove side cover screws using medium phillips screwdriver.
- Remove side cover.
- Pull fuel line (attached valve elbow) off fuel filter neck.
- Fuel filter 90 turn to clockwise and pull to remove.
- Wash fuel filter with clean fuel and replace in tank.
- Attach fuel line to fuel filter neck.
- Reinstall side cover.
Fuel Filter Fuel Line
Side Cover
Fuel Filter
Figure19.
Side Cover
Fuel Line