Meinberg TCG510 - Manual (Page 15)

15
Technical data
Required inputs: 10 MHz oszillator-clock (TTL-level)
positive pulse per second (TTL-level)
serial time-telegram (RS232)
Outputs: 5 unbalanced AM-sine wave-signals (4 x RF-connector, 1 x VG):
3V
PP
(MARK) / 1V
PP
(SPACE) into 50
Ω
(IRIG)
2.17V
PP
(MARK) / 0.688V
PP
(SPACE) into 50
Ω
(AFNOR)
PWM-signal: TTL into 50
Ω
, high- and low-active
RS232, high- and low-active
RS422
open drain, data of transistor:
Uds
max
: 100 VDC, Id
max
: 150 mA, P
tot
: 250mW
serial time-telegram (RS232)
Pilot-LED: Status of the time-code-generator
Power supply: +5V, @ 170mA
Temperature
range:
0-60 degrees (Celsius)
Connectors: 64-pin rear VG edge connector DIN 41612
BNC-coaxial-plug connector for the sine wave-signal in the
frontpanel if requested
Board dimension: 100mm x 160mm
Frontpanel: 4TE (20mm), 3HE(128,4mm)
Options: on-board 10 MHz reference oscillator
4 balanced outputs 600
Ω
(4 x RF-connector)
CE-Label
This device conforms to the directive 89/336/EWG on the
approximation of the laws of the Member States of the European
Community relating to electromagnetc compatibility.