Mogar Music 3DENHANCER User Manual
Page 9
4.1
CONTROLS
1 2 3 4 5 6 7
8 9
11
Fig.4.1 Front panel controls
1) The INPUT LEVEL potentiometer allows to adjust input amplitude of the signal.
2) The BASS PROCESSOR potentiometer allows giving much more power to bass
frequencies.
3) The FAT BURNER switch allow to cut out the over-low frequency in order to prevent
speakers
' damages.
4) The PUNCH control gives an impressive punchy sound to your music.
5) The HIGH SHAPE move
s the cut off frequency of the High Frequency Processor.
6) The HIGH ENHANCER potentiometer manages the High Processor enhancement.
7) The METER MODE switch allows selecting from Input meter to output meter.
8) This potentiometer allows modifying the quantity of 3D effect. It works only with
sources.
9) This switch allows inserting or to by-pass the 3D Processor
10)The PROCESS ON is the general switch of the 3D Enhancer. When is pushed down
the processor is on. When it is pushed out the unit is by-passed.
11)The POWER ON switch is the main power switch and allow you to switch on /off the
device.
9 – 3D ENHANCER USER’S MANUAL