Mogar Music POWERSTATION - Manual (Page 6)

5 - POWER STATION USER’S MANUAL
the master playback signal and you can manage both the levels of the two sources as
you desire.
2.3 The mono Switch.
Each of the four Channels is equipped with a Mono function Switch that allow you to
decide if you need to work with a mono or a stereo signal. In this way if you choose the
possibility you can mix more than two different signals and listen to them in both your
ears. When a MONO Switch of a channel is pushed down this means that this channel
is set to mono mode and the red led is on.
2.4 The power output
Each channel has a stereo power output on a standard stereo Jack. This power output
is full protected and is possible to connect on it more than one headphones set just
using stereo
Y-shaped adapters.
8. INSTALLATION
3.1 Packaging
XXL carefully pack in the factory all its units and the packaging was designed to protect
the unit from rough handling. Nevertheless, we recommend that you carefully examine
the packaging and its contents for any signs of physical damage, which may have
occurred in transit.
ATTENTION!
If the unit is damaged, please do not return it to us, but notify your dealer and the
shipping company immediately, otherwise claims for damage or replacement may
not be granted. The consignee must make shipping claims.
3.2 Rack mounting
The POWER STATION fits into one new standard “half rack” unit of space (1 3/4").
Please allow at least an additional 4" depth for the connectors on the back panel. Be
sure that there is enough air space around the unit for cooling and please do not place
the unit on high temperature devices such as power amplifiers to avoid overheating. It is
also possible to fit the POWER STATION into one standard rack unit of space (1 3/4")
using the optional RK100 rack adapter that you can buy from your Dealer.
3.3 Mains voltage
Before you connect your unit to the mains AC socket, please make sure that your local
voltage matches the voltage required by the external power supply of your unit! In case
that the label of your Unit transformer require a voltage different from the one that you
have in your Country do not connect it to mains and contact your Dealer.