NavCom SF-3050 Rev.E - Manual (Page 123)

SF-3050 GNSS Product User Guide
– Rev E
3-97

The first part of the IP address, 192.168.0, is
the same for both the SF-3050 and the PC.
The last part of the IP address must be
unique for every device. In this case, it is
100 for the PC.
8. Press the Tab button on the keyboard. The Subnet
mask is automatically populated.
9. Click the OK button in this window and also in the
Local Area Connection window.
10. Continue to the next section for connection
instructions.
Connect SF-3050 to PC
1. Open StarUtil 3000 on the PC.
2. Click the Connections button to establish
communications between the PC and the
SF-3050. The Port Configuration dialog box
opens.
Refer to Figure 68 for the steps below:
3. Select Ethernet as the Connection Type.

Do not change the default Ethernet
Settings: 192.168.0.2 is the factory
default IP address of the SF-3050. The
default virtual COM port is 4361.