NavCom SF-2050 Rev.D - Manual (Page 26)

SF-2050 User Guide - Rev. D
Chapter 3 Installation
This chapter provides guidance on how the hardware
should be installed for optimum performance.
Tri-Mode Antenna
The antenna is fitted with a 5/8 inch BSW threaded
mount with a depth of 16mm (0.63 inch). This should
be used as the primary means of mounting the
antenna.
It is possible to remove the 5/8 inch BSW threaded alloy
insert to reveal the secondary means of mounting the
antenna which consists of a 1-14UNS-2B thread with a
depth of 16mm (0.63 inch) typically used in the marine
industry for navigation antennas.
Figure 6: Tri-Mode GPS Antenna
‡
The eight Phillips screws on the base of the antenna
should not be loosened or used for mounting the
antenna. This will compromise the environmental seal
3-24