Nevion ARC-SD-DMUX User Manual
Page 7
ARC-SD-DMUX
Rev. B
nevion.com | 7
2.1.1.6 Analog Audio output
Number of outputs
1 stereo pair
Connectors
2 x WECO audio connectors
Impedance
< 66ohm
Dynamic range
>100dB(A)
Crosstalk
< -60dB 20Hz-20kHz
THD+N
Better than 0.03%
Frequency response
20Hz-20kHz +/- 0.5dB
Output level
24dBu +/- 1dB
Common mode DC
Immunity
0 to +50V
Level adjustment range
0
– 24dBu with 1dB step
Two tone intermodulation
< -80dB
Output resolution
24 bits
2.1.1.7 AES output
Number of outputs
1
Connectors
WECO audio connector
Return loss
110R +/-20% 0.1MHz
– 6.144MHz
Output jitter
<0.0025UI peak
2.1.1.8 Supported standards
SD, 270 Mbps
SMPTE 259M, SMPTE 272M-AC, SMPTE297M
Analog video
SMPTE 170M, SMPTE 274M, ITU-R. BT.470,
Centre of picture definition
SMPTE RP187, ITU-R. BT.470
Aspect ratio preservation
SMPTE RP199-1999, SMPTE RP221
Video switch point
definition and sync
SMPTE RP168 (tri-level), SMPTE 170M, ITU-R. BT.470
AES
AES3-1996
Optical
SMPTE 297M
EDH
Compliant to SMPTE RP165
Video Payload
Identification
SMPTE 352M-2002, SMPTE 2016-1, SMPTE 2016-3, SMPTE
RP 186
2.1.1.9 Minimum video signal delay through processing
Minimum delay
256 lines
2.1.1.10 Other
Power consumption
+5V DC/ 4.6W (4.2W without optical receiver)
+15V DC / 2.55W
-15V DC/ 0.5W
Max 6 cards per frame with dual PWR-AC-75W